| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117 |
- 1 2 3 4 5 6 7 8
- A-A ( 5 : 1 )
- A A
- Z ( 20 : 1 ) b 0,01 A
- 2x
- X r Ø0,05 CZ B
- g 0,01
- R2 X ( 10 : 1 )
- 5°
- ,8
- R0
- Ø 4,1
- B Z -0,1 B
- 2x Ø19,2 +- 00,05 CT
- -0,05
- Ø15,15 +- 0,05
- 1,65 -0,1
- 0
- n11
- Y ( 10 : 1 ) ,5
- R0,
- 5
- R0
- C E C
- Rz 1,6
- Rpk 0,2
- °
- 45
- E #F
- Ø4,5 x7 (++ 0,028) È
- f 0,01 A 0,7 Y b 0,01 A
- c 0,01 r Ø0,05 B
- 0,04
- A
- F 1,5 +- 0,1
- D 0 D
- All dimensions apply to the finished part including surface/material 2 +- 0,1
- 0
- treatment.
- Material: 1.4021 Quality standard: EN 10095 c 0,005 9,3 +- 0,1
- Ra 0,8
- Surface/material treatment:
- 4,8 `0,05 0
- Hardened to 48 HRC +2/-0
- Raw part No: -
- Rz 0,25
- Surface texture: Edge finish:
- -0,2
- Rz 16 -0,05 +0,2
- E valid for machined surface
- according to DIN ISO 1302 according to DIN ISO 13715
- B E
- Concepts, principales and rules according to: ISO 8015
- Dimensions according to: ISO 14405 1-3 1 Start drawing 04.04.2018 LKA - -
- Tolerances of form, orientation, location and run-out: ISO 1101 REV. DESCRIPTION SECTION DATE DRAWN BY INSP. DATE INSP. BY
- Edge finish according to: ISO 13715
- Surface texture according to: ISO 1302 REVISION HISTORY
- Limits according to: ISO 286-2 Copyright
- 16% - rule not applicable The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
- Nominal geometry (theoretically exact) defined by CAD file: express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event
- 5129275_Rev01.stp A A of the grant of a patent, utility model or design. (ISO 16016)
- Weight: Scale: Unit: Projection: Document type:
- Valid for all untoleranced dimensions: Component Drawing
- d 0,2 A B - 2:1 mm ISO 128
- Method 1
- Description:
- F Cleanliness:
- HUM 11.07.2018 Valve Lifter GV12.2 F
- Part has to be degreased and free of deposits, detachable
- burrs and visual detectable particles. Design Freeze Release B1 -Sample Part Number: Page:
- Delivery conditions: tbd Drawing Approval Stamp ENGINE Division 5129275 1/1
- 1 2 3 4 5 6 7 A3
-
|
