Home Explore Help
Sign In
bscheibel
/
technical_drawings_extraction
Watch 1
Star 0
Fork 0
Files Issues 0 Pull Requests 0 Wiki
Tree: cd5455461d
Branches Tags
technical_dr...
/
temporary
/
text_merged_GV12.csv

text_merged_GV12.csv 34 KB
History Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172 
  1. ,cluster,Text
    2. 

  2. 0,0,CELLSTYLEMAP CELLSTYLEMAP
    3. 

  3. 1,1,\fArial|b1|i0;\H2.0000;Angelehnt an HN810 \fArial|b1|i0;\H2.0000;Losgröße (Stk.) \fArial|b1|i0;\H2.0000;von \fArial|b1|i0;\H2.0000;bis \fArial|b0|i0;\H2.0000;9 \fArial|b0|i0;\H2.0000;15 \fArial|b0|i0;\H2.0000;16 \fArial|b0|i0;\H2.0000;26 \fArial|b0|i0;\H2.0000;51 \fArial|b0|i0;\H2.0000;25 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;90 \fArial|b0|i0;\H2.0000;150 \fArial|b0|i0;\H2.0000;91 \fArial|b0|i0;\H2.0000;280 \fArial|b0|i0;\H2.0000;151 \fArial|b0|i0;\H2.0000;500 \fArial|b0|i0;\H2.0000;281 \fArial|b0|i0;\H2.0000;1200 \fArial|b0|i0;\H2.0000;501 \fArial|b0|i0;\H2.0000;3200 \fArial|b0|i0;\H2.0000;1201 \fArial|b0|i0;\H2.0000;1000 \fArial|b0|i0;\H2.0000;3201 \fArial|b1|i0;\H2.0000;Angelehnt an HN810 \fArial|b1|i0;\H2.0000;Losgröße (Stk.) \fArial|b1|i0;\H2.0000;von \fArial|b1|i0;\H2.0000;bis \fArial|b0|i0;\H2.0000;9 \fArial|b0|i0;\H2.0000;15 \fArial|b0|i0;\H2.0000;16 \fArial|b0|i0;\H2.0000;26 \fArial|b0|i0;\H2.0000;51 \fArial|b0|i0;\H2.0000;25 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;90 \fArial|b0|i0;\H2.0000;150 \fArial|b0|i0;\H2.0000;91 \fArial|b0|i0;\H2.0000;280 \fArial|b0|i0;\H2.0000;151 \fArial|b0|i0;\H2.0000;500 \fArial|b0|i0;\H2.0000;281 \fArial|b0|i0;\H2.0000;1200 \fArial|b0|i0;\H2.0000;501 \fArial|b0|i0;\H2.0000;3200 \fArial|b0|i0;\H2.0000;1201 \fArial|b0|i0;\H2.0000;1000 \fArial|b0|i0;\H2.0000;3201
    4. 

  4. 2,2,\fArial|b1|i0;\H2.0000;Stichprobengröße (Stk.) \fArial|b0|i0;\H2.0000;Vollprüfung \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;80 \fArial|b0|i0;\H2.0000;125 \fArial|b0|i0;\H2.0000;200 \fArial|b1|i0;\H2.5000;Zu überprüfender Anlieferungszustand: \fArial|b0|i0;\H2.5000;Reinheitsanforderung: \fArial|b0|i0;\H2.5000;Verpackungsvorschrift: \fArial|b0|i0;\H2.5000;Allg. Anforderungen: \fArial|b1|i0;\H2.0000;Stichprobengröße (Stk.) \fArial|b0|i0;\H2.0000;Vollprüfung \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;80 \fArial|b0|i0;\H2.0000;125 \fArial|b0|i0;\H2.0000;200 \fArial|b1|i0;\H2.5000;Zu überprüfender Anlieferungszustand: \fArial|b0|i0;\H2.5000;Reinheitsanforderung: \fArial|b0|i0;\H2.5000;Verpackungsvorschrift: \fArial|b0|i0;\H2.5000;Allg. Anforderungen:
    5. 

  5. 3,3,"entfettet, ultraschallgereinigt separat verpackt alle Kanten entgratet, gehärtet auf 48 HRC +2/-0 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;1 \fArial|b0|i0;\H2.0000;unless otherwise specified within the drawing \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PLimits according to:                                                     \H0.5x; \H2x; ISO 286-2\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } except for fiber\P\fArial|b0|i0;\H2.0000;Residue classification                                    acc. to table 01 \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;16% - rule EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp - \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PLimits according to:                                                     \H0.5x; \H2x; ISO 286-2\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } except for fiber\P\fArial|b0|i0;\H2.0000;Residue classification                                    acc. to table 01 \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;16% - rule EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp - \fArial|b0|i0;\H2.0000;Valid for all untoleranced dimensions: \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PLimits according to:                                                     \H0.5x; \H2x; ISO 286-2\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;16% - rule EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp \fArial|b0|i0;\H2.0000;Valid for all untoleranced dimensions: \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;General tolerances according to:\fArial|b0|i0;\H2.5000;    ISO 2768 - \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Corresponding CAD-file: \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;General tolerances according to:\fArial|b0|i0;\H2.5000;    ISO 2768 - \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Corresponding CAD-file: \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 3865240_Rev03.stp Rz 16 -0,2 -0,05 +0,4 stored separately ultrasonically cleaned and degreased mH \fArial|b0|i0;\H2.0000;0,4 \fArial|b0|i0;\H2.0000;A1 \fArial|b0|i0;\H2.0000;≤ 0,4 \fArial|b0|i0;\H2.0000;≤ 0,2 \fArial|b0|i0;\H2.0000;8,0 \fArial|b0|i0;\H2.0000;8,0 \fArial|b0|i0;\H2.0000;15,0 \fArial|b0|i0;\H2.0000;0,7 {\H0.57143x;General tolerances according to: \P\H0.81496x; \H0.12271x;\P\H12.5x;DIN EN ISO 8062-3 - DCTG\H1.11277x; } \fArial|b0|i0;\H2.0000;A3 \fArial|b0|i0;\H2.0000;A4 \fArial|b0|i0;\H2.0000;A2 \fArial|b0|i0;\H2.0000;- \fArial|b0|i0;\H2.0000;Exceptions \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;General pore class: \fArial|b0|i0;\H2.5000;2 \fArial|b0|i0;\H2.5600;3 \fArial|b0|i0;\H2.0000;≤ 0,6 \fArial|b0|i0;\H2.0000;30,0 \fArial|b0|i0;\H2.0000;1,0 \fArial|b0|i0;\H2.0000;2,0 \fArial|b0|i0;\H2.0000;Pore\P\fArial|b0|i0;\H2.0000;class \fArial|b0|i0;\H2.5000;1 \fArial|b0|i0;\H2.0000;0,4 \fArial|b0|i0;\H2.0000;≤ 1,0 \fArial|b0|i0;\H2.0000;≤ 0,2 \fArial|b0|i0;\H2.5000;4 \fArial|b0|i0;\H2.5000;5 \fArial|b0|i0;\H2.0000;30,0 P  distance to other pores of 5 mm.} \fArial|b0|i0;\H2.0000;Min. distance between\P\fArial|b0|i0;\H2.0000;pores [mm] \fArial|b0|i0;\H2.0000;Casting defects: \fArial|b0|i0;\H2.0000;Max. size of\P\fArial|b0|i0;\H2.0000;pores [mm] \fArial|b0|i0;\H2.0000;|X| [mm] \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;0,4 \fArial|b0|i0;\H2.0000;A1 \fArial|b0|i0;\H2.0000;≤ 0,4 \fArial|b0|i0;\H2.0000;≤ 0,2 \fArial|b0|i0;\H2.0000;8,0 \fArial|b0|i0;\H2.0000;8,0 \fArial|b0|i0;\H2.0000;15,0 \fArial|b0|i0;\H2.0000;0,7 {\H0.57143x;General tolerances according to: \P\H0.81496x; \H0.12271x;\P\H12.5x;DIN EN ISO 8062-3 - DCTG\H1.11277x; } \fArial|b0|i0;\H2.0000;A3 \fArial|b0|i0;\H2.0000;A4 \fArial|b0|i0;\H2.0000;A2 \fArial|b0|i0;\H2.0000;- \fArial|b0|i0;\H2.0000;Exceptions \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;General pore class: \fArial|b0|i0;\H2.5000;2 \fArial|b0|i0;\H2.5600;3 \fArial|b0|i0;\H2.0000;≤ 0,6 \fArial|b0|i0;\H2.0000;30,0 \fArial|b0|i0;\H2.0000;1,0 \fArial|b0|i0;\H2.0000;2,0 \fArial|b0|i0;\H2.0000;Pore\P\fArial|b0|i0;\H2.0000;class \fArial|b0|i0;\H2.5000;1 \fArial|b0|i0;\H2.0000;0,4 \fArial|b0|i0;\H2.0000;≤ 1,0 \fArial|b0|i0;\H2.0000;≤ 0,2 \fArial|b0|i0;\H2.5000;4 \fArial|b0|i0;\H2.5000;5 \fArial|b0|i0;\H2.0000;30,0 P  distance to other pores of 5 mm.} \fArial|b0|i0;\H2.0000;Min. distance between\P\fArial|b0|i0;\H2.0000;pores [mm] \fArial|b0|i0;\H2.0000;Casting defects: \fArial|b0|i0;\H2.0000;Max. size of\P\fArial|b0|i0;\H2.0000;pores [mm] \fArial|b0|i0;\H2.0000;|X| [mm] \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H6.0000;TBD \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;Concepts, principales and rules according to:^IISO 8015\P\fArial|b0|i0;\H2.0000;Dimensions according to:^I^I^IISO 14405 1-3 \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: \fArial|b0|i0;\H2.0000;unless otherwise specified within the drawing \fArial|b0|i0;1 \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;Concepts, principales and rules according to:^IISO 8015\P\fArial|b0|i0;\H2.0000;Dimensions according to:^I^I^IISO 14405 1-3 \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: \fArial|b0|i0;\H2.0000;unless otherwise specified within the drawing \fArial|b0|i0;1 xvcxv -0,05 Kantenbruch -0,1 1 \fArial|b1|i0;\H2.0000;Angelehnt an HN810 \fArial|b1|i0;\H2.0000;Losgröße (Stk.) \fArial|b1|i0;\H2.0000;von \fArial|b1|i0;\H2.0000;bis \fArial|b1|i0;\H2.0000;Stichprobengröße (Stk.) \fArial|b0|i0;\H2.0000;9 \fArial|b0|i0;\H2.0000;15 \fArial|b0|i0;\H2.0000;Vollprüfung \fArial|b0|i0;\H2.0000;16 \fArial|b0|i0;\H2.0000;26 \fArial|b0|i0;\H2.0000;51 \fArial|b0|i0;\H2.0000;25 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;90 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;150 \fArial|b0|i0;\H2.0000;91 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;280 \fArial|b0|i0;\H2.0000;151 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;500 \fArial|b0|i0;\H2.0000;281 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;1200 \fArial|b0|i0;\H2.0000;501 \fArial|b0|i0;\H2.0000;80 \fArial|b0|i0;\H2.0000;3200 \fArial|b0|i0;\H2.0000;1201 \fArial|b0|i0;\H2.0000;125 \fArial|b0|i0;\H2.0000;1000 \fArial|b0|i0;\H2.0000;3201 \fArial|b0|i0;\H2.0000;200 \fArial|b0|i0;\H6.0000;Wareneingangszeichnung \fArial|b0|i0;1 \fArial|b0|i0;\H2.2000;Only for inquiry LKA 24.10.2017 \fArial|b0|i0;\H2.2000;Prototype release      -Sample HUM 15.11.2017 B4 \fArial|b0|i0;\H2.2000;Incoming inspection release LKA 11.01.2018 \fArial|b0|i0;\H2.2000;Design Freeze Release      -Sample HUM 11.07.2018 B1 \fArial|b0|i0;\H2.2000;Ready for production release \fArial|b0|i0;\H2.2000;Equipment release Freigabe für A-Sample Bestellung \fArial|b0|i0;\H2.5000;Projektleiter Gerhard Ranegger Matthias Huschenbett \fArial|b0|i0;\H2.5000;Techn. Projektleiter \fArial|b0|i0;\H2.2000;Production release \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PLimits according to:                                                     \H0.5x; \H2x; ISO 286-2\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;16% - rule \fArial|b0|i0;\H2.0000;Valid for all untoleranced dimensions: {\H0.57143x;Cleanliness:\P\H0.15x;\P\H7.66667x;Part has to be degreased and free of deposits, detachable burrs and visual detectable particles.} \fArial|b0|i0;\H2.0000;Delivery conditions: \fArial|b0|i0;\H1.4986;valid for machined surface EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 not applicable 5129275_Rev01.stp \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PTolerances on linear sizes according to:                     \H0.5x;  \H2x;ISO 286\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;Valid for all untoleranced dimensions: {\H0.57143x;Cleanliness:\P\H0.15x;\P\H7.66667x;Part has to be degreased and free of deposits, detachable burrs and visual detectable particles.} \fArial|b0|i0;\H2.0000;Delivery conditions: EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 5129275_Rev01.stp E F 1 d 0,2 A B 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 5129275_Rev01.stp acc. to LV123 - 6.2.1. entfettet, ultraschallgereinigt separat verpackt alle Kanten entgratet,                    gehärtet auf 48 HRC +2/-0 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp - 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp - 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp 3865240_Rev03.stp Rz 16 -0,2 -0,05 +0,4 stored separately ultrasonically cleaned and degreased mH xvcxv -0,05 Kantenbruch -0,1 1 LKA 24.10.2017 HUM 15.11.2017 B4 LKA 11.01.2018 HUM 11.07.2018 B1 Freigabe für A-Sample Bestellung Gerhard Ranegger Matthias Huschenbett 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 not applicable 5129275_Rev01.stp 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 5129275_Rev01.stp 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 5129275_Rev01.stp acc. to LV123 - 6.2.1. Layout1 Layout2 Model entfettet, ultraschallgereinigt separat verpackt alle Kanten entgratet, gehärtet auf 48 HRC +2/-0 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;1 \fArial|b0|i0;\H2.0000;unless otherwise specified within the drawing \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PLimits according to:                                                     \H0.5x; \H2x; ISO 286-2\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } except for fiber\P\fArial|b0|i0;\H2.0000;Residue classification                                    acc. to table 01 \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;16% - rule EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp - \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PLimits according to:                                                     \H0.5x; \H2x; ISO 286-2\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } except for fiber\P\fArial|b0|i0;\H2.0000;Residue classification                                    acc. to table 01 \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;16% - rule EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp - \fArial|b0|i0;\H2.0000;Valid for all untoleranced dimensions: \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H1.4986;valid for machined surface \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PLimits according to:                                                     \H0.5x; \H2x; ISO 286-2\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;16% - rule EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp \fArial|b0|i0;\H2.0000;Valid for all untoleranced dimensions: \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;General tolerances according to:\fArial|b0|i0;\H2.5000;    ISO 2768 - \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Corresponding CAD-file: \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;General tolerances according to:\fArial|b0|i0;\H2.5000;    ISO 2768 - \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Corresponding CAD-file: \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 3865240_Rev03.stp Rz 16 -0,2 -0,05 +0,4 stored separately ultrasonically cleaned and degreased mH \fArial|b0|i0;\H2.0000;0,4 \fArial|b0|i0;\H2.0000;A1 \fArial|b0|i0;\H2.0000;≤ 0,4 \fArial|b0|i0;\H2.0000;≤ 0,2 \fArial|b0|i0;\H2.0000;8,0 \fArial|b0|i0;\H2.0000;8,0 \fArial|b0|i0;\H2.0000;15,0 \fArial|b0|i0;\H2.0000;0,7 {\H0.57143x;General tolerances according to: \P\H0.81496x; \H0.12271x;\P\H12.5x;DIN EN ISO 8062-3 - DCTG\H1.11277x; } \fArial|b0|i0;\H2.0000;A3 \fArial|b0|i0;\H2.0000;A4 \fArial|b0|i0;\H2.0000;A2 \fArial|b0|i0;\H2.0000;- \fArial|b0|i0;\H2.0000;Exceptions \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;General pore class: \fArial|b0|i0;\H2.5000;2 \fArial|b0|i0;\H2.5600;3 \fArial|b0|i0;\H2.0000;≤ 0,6 \fArial|b0|i0;\H2.0000;30,0 \fArial|b0|i0;\H2.0000;1,0 \fArial|b0|i0;\H2.0000;2,0 \fArial|b0|i0;\H2.0000;Pore\P\fArial|b0|i0;\H2.0000;class \fArial|b0|i0;\H2.5000;1 \fArial|b0|i0;\H2.0000;0,4 \fArial|b0|i0;\H2.0000;≤ 1,0 \fArial|b0|i0;\H2.0000;≤ 0,2 \fArial|b0|i0;\H2.5000;4 \fArial|b0|i0;\H2.5000;5 \fArial|b0|i0;\H2.0000;30,0 P  distance to other pores of 5 mm.} \fArial|b0|i0;\H2.0000;Min. distance between\P\fArial|b0|i0;\H2.0000;pores [mm] \fArial|b0|i0;\H2.0000;Casting defects: \fArial|b0|i0;\H2.0000;Max. size of\P\fArial|b0|i0;\H2.0000;pores [mm] \fArial|b0|i0;\H2.0000;|X| [mm] \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;0,4 \fArial|b0|i0;\H2.0000;A1 \fArial|b0|i0;\H2.0000;≤ 0,4 \fArial|b0|i0;\H2.0000;≤ 0,2 \fArial|b0|i0;\H2.0000;8,0 \fArial|b0|i0;\H2.0000;8,0 \fArial|b0|i0;\H2.0000;15,0 \fArial|b0|i0;\H2.0000;0,7 {\H0.57143x;General tolerances according to: \P\H0.81496x; \H0.12271x;\P\H12.5x;DIN EN ISO 8062-3 - DCTG\H1.11277x; } \fArial|b0|i0;\H2.0000;A3 \fArial|b0|i0;\H2.0000;A4 \fArial|b0|i0;\H2.0000;A2 \fArial|b0|i0;\H2.0000;- \fArial|b0|i0;\H2.0000;Exceptions \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;General pore class: \fArial|b0|i0;\H2.5000;2 \fArial|b0|i0;\H2.5600;3 \fArial|b0|i0;\H2.0000;≤ 0,6 \fArial|b0|i0;\H2.0000;30,0 \fArial|b0|i0;\H2.0000;1,0 \fArial|b0|i0;\H2.0000;2,0 \fArial|b0|i0;\H2.0000;Pore\P\fArial|b0|i0;\H2.0000;class \fArial|b0|i0;\H2.5000;1 \fArial|b0|i0;\H2.0000;0,4 \fArial|b0|i0;\H2.0000;≤ 1,0 \fArial|b0|i0;\H2.0000;≤ 0,2 \fArial|b0|i0;\H2.5000;4 \fArial|b0|i0;\H2.5000;5 \fArial|b0|i0;\H2.0000;30,0 P  distance to other pores of 5 mm.} \fArial|b0|i0;\H2.0000;Min. distance between\P\fArial|b0|i0;\H2.0000;pores [mm] \fArial|b0|i0;\H2.0000;Casting defects: \fArial|b0|i0;\H2.0000;Max. size of\P\fArial|b0|i0;\H2.0000;pores [mm] \fArial|b0|i0;\H2.0000;|X| [mm] \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H6.0000;TBD \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;Concepts, principales and rules according to:^IISO 8015\P\fArial|b0|i0;\H2.0000;Dimensions according to:^I^I^IISO 14405 1-3 \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: \fArial|b0|i0;\H2.0000;unless otherwise specified within the drawing \fArial|b0|i0;1 \fArial|b0|i0;\H2.0000;Cleanliness: \fArial|b0|i0;\H2.0000;Concepts, principales and rules according to:^IISO 8015\P\fArial|b0|i0;\H2.0000;Dimensions according to:^I^I^IISO 14405 1-3 \fArial|b0|i0;\H2.0000;Packaging: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: \fArial|b0|i0;\H2.0000;unless otherwise specified within the drawing \fArial|b0|i0;1 xvcxv -0,05 Kantenbruch -0,1 1 \fArial|b1|i0;\H2.0000;Angelehnt an HN810 \fArial|b1|i0;\H2.0000;Losgröße (Stk.) \fArial|b1|i0;\H2.0000;von \fArial|b1|i0;\H2.0000;bis \fArial|b1|i0;\H2.0000;Stichprobengröße (Stk.) \fArial|b0|i0;\H2.0000;9 \fArial|b0|i0;\H2.0000;15 \fArial|b0|i0;\H2.0000;Vollprüfung \fArial|b0|i0;\H2.0000;16 \fArial|b0|i0;\H2.0000;26 \fArial|b0|i0;\H2.0000;51 \fArial|b0|i0;\H2.0000;25 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;90 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;150 \fArial|b0|i0;\H2.0000;91 \fArial|b0|i0;\H2.0000;13 \fArial|b0|i0;\H2.0000;280 \fArial|b0|i0;\H2.0000;151 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;500 \fArial|b0|i0;\H2.0000;281 \fArial|b0|i0;\H2.0000;50 \fArial|b0|i0;\H2.0000;1200 \fArial|b0|i0;\H2.0000;501 \fArial|b0|i0;\H2.0000;80 \fArial|b0|i0;\H2.0000;3200 \fArial|b0|i0;\H2.0000;1201 \fArial|b0|i0;\H2.0000;125 \fArial|b0|i0;\H2.0000;1000 \fArial|b0|i0;\H2.0000;3201 \fArial|b0|i0;\H2.0000;200 \fArial|b0|i0;\H6.0000;Wareneingangszeichnung \fArial|b0|i0;1 \fArial|b0|i0;\H2.2000;Only for inquiry LKA 24.10.2017 \fArial|b0|i0;\H2.2000;Prototype release      -Sample HUM 15.11.2017 B4 \fArial|b0|i0;\H2.2000;Incoming inspection release LKA 11.01.2018 \fArial|b0|i0;\H2.2000;Design Freeze Release      -Sample HUM 11.07.2018 B1 \fArial|b0|i0;\H2.2000;Ready for production release \fArial|b0|i0;\H2.2000;Equipment release Freigabe für A-Sample Bestellung \fArial|b0|i0;\H2.5000;Projektleiter Gerhard Ranegger Matthias Huschenbett \fArial|b0|i0;\H2.5000;Techn. Projektleiter \fArial|b0|i0;\H2.2000;Production release \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H1.4986;according to DIN ISO 13715 \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PLimits according to:                                                     \H0.5x; \H2x; ISO 286-2\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;16% - rule \fArial|b0|i0;\H2.0000;Valid for all untoleranced dimensions: {\H0.57143x;Cleanliness:\P\H0.15x;\P\H7.66667x;Part has to be degreased and free of deposits, detachable burrs and visual detectable particles.} \fArial|b0|i0;\H2.0000;Delivery conditions: \fArial|b0|i0;\H1.4986;valid for machined surface EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 not applicable 5129275_Rev01.stp \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Nominal geometry (theoretically exact) defined by CAD file: 1302\H1.25429x; \H0.79726x;\PTolerances on linear sizes according to:                     \H0.5x;  \H2x;ISO 286\H1.25429x; \H0.79726x;\P\H1.23656x; \H0.8087x;\P\H1.23236x; } \fArial|b0|i0;\H2.0000;Material: 1.4021 \fArial|b0|i0;\H2.0000;Quality standard: \fArial|b0|i0;\H2.0000;Raw part No: \fArial|b0|i0;\H2.0000;Surface/material treatment: \fArial|b0|i0;\H2.0000;Valid for all untoleranced dimensions: {\H0.57143x;Cleanliness:\P\H0.15x;\P\H7.66667x;Part has to be degreased and free of deposits, detachable burrs and visual detectable particles.} \fArial|b0|i0;\H2.0000;Delivery conditions: EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 5129275_Rev01.stp E F 1 d 0,2 A B 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 5129275_Rev01.stp acc. to LV123 - 6.2.1. entfettet, ultraschallgereinigt separat verpackt alle Kanten entgratet,                    gehärtet auf 48 HRC +2/-0 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp - 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp - 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,4 not applicable 5129275_Rev01.stp 3865240_Rev03.stp Rz 16 -0,2 -0,05 +0,4 stored separately ultrasonically cleaned and degreased mH xvcxv -0,05 Kantenbruch -0,1 1 LKA 24.10.2017 HUM 15.11.2017 B4 LKA 11.01.2018 HUM 11.07.2018 B1 Freigabe für A-Sample Bestellung Gerhard Ranegger Matthias Huschenbett 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 not applicable 5129275_Rev01.stp 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 5129275_Rev01.stp 1.4021 EN 10095 Hardened to 48 HRC +2/-0 - Rz 16 -0,2 -0,05 +0,2 5129275_Rev01.stp acc. to LV123 - 6.2.1. Layout1 Layout2 Model"
    6. 

  6. 4,4,stored separately - tbd acc. to LV123 - 6.2.1. stored separately - tbd acc. to LV123 - 6.2.1. stored separately - tbd acc. to LV123 - 6.2.1. stored separately - tbd acc. to LV123 - 6.2.1.
    7. 

  7. 5,5,\fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;General mold drafts: \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;General mold drafts: \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;General mold drafts: \fArial|b0|i0;\H1.4986;according to DIN ISO 1302 \fArial|b0|i0;\H2.0000;General mold drafts:
    8. 

  8. 6,6,\fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Edge finish: \fArial|b0|i0;\H2.0000;Edge finish:
    9. 

  9. 7,7,\fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Surface texture: \fArial|b0|i0;\H2.0000;Surface texture:
    10. 

  10. 8,8,"\fArial|b0|i0;\H2.0000;This is an auxiliary drawing, the missing dimensions have to be sourced from the corresponding CAD-file: \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;This is an auxiliary drawing, the missing dimensions have to be sourced from the corresponding CAD-file: \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;This is an auxiliary drawing, the missing dimensions have to be sourced from the corresponding CAD-file: \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment. \fArial|b0|i0;\H2.0000;This is an auxiliary drawing, the missing dimensions have to be sourced from the corresponding CAD-file: \fArial|b0|i0;\H2.0000;All dimensions apply to the finished part including surface/material treatment."
    11. 

  11. 9,9,"\A1;R0,5 <> <> \A1;R0,5 <> <>"
    12. 

  12. 10,10,"\A1;R0,5 \A1;R0,5"
    13. 

  13. 11,11,A A
    14. 

  14. 12,12,A A
    15. 

  15. 13,13,"\A1;2{\H1.25;\S+0,1^ -0;} \A1;4,8{\H1.25;±0,05} \A1;9,3{\H1.25;\S+0,1^ -0;} \A1;1,5{\H1.25;\S+0,1^ -0;} \A1;\fArial|b0|i0;\H1.7500;Ø4,5 x7 (\S+0,04^ +0,028;) \fAIGDT|b0|i0;\H1.7500;È <> <> <> <> \A1;2{\H1.25;\S+0,1^ -0;} \A1;4,8{\H1.25;±0,05} \A1;9,3{\H1.25;\S+0,1^ -0;} \A1;1,5{\H1.25;\S+0,1^ -0;} \A1;\fArial|b0|i0;\H1.7500;Ø4,5 x7 (\S+0,04^ +0,028;) \fAIGDT|b0|i0;\H1.7500;È <> <> <> <>"
    16. 

  16. 14,14,"A Rz 1,6 Rpk 0,2 E # F f 0,01 A c 0,01 OLE for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. (ISO 16016) \fArial|b0|i0;\H2.0000;Weight: \fArial|b0|i0;\H2.0000;Projection: \fArial|b0|i0;\H2.0000;ISO 128\P\fArial|b0|i0;\H2.0000;Method 1 \fArial|b0|i0;\H2.0000;Scale: \fArial|b0|i0;\H2.0000;Unit: \fArial|b0|i0;\H2.5000;mm - 2 : 1 A-A ( 5 : 1 ) - 2 : 1 A Rz 1,6 Rpk 0,2 E # F f 0,01 A c 0,01 OLE for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. (ISO 16016) \fArial|b0|i0;\H2.0000;Weight: \fArial|b0|i0;\H2.0000;Projection: \fArial|b0|i0;\H2.0000;ISO 128\P\fArial|b0|i0;\H2.0000;Method 1 \fArial|b0|i0;\H2.0000;Scale: \fArial|b0|i0;\H2.0000;Unit: \fArial|b0|i0;\H2.5000;mm - 2 : 1 A-A ( 5 : 1 ) - 2 : 1"
    17. 

  17. 15,15,"c 0,005 \A1;\fArial|b0|i0;\H1.7500;2x Ø19,2{\H1.25;\S+0^ -0,05;} CT \A1;\fArial|b0|i0;\H1.7500;Ø15,15{\H1.25;\S+0,05^ -0;} \A1;{\fAIGDT|b0|i0;\H1.7500;\ln}\fArial|b0|i0;\H1.7500;11 \fArial|b0|i0;\H1.7500;Ø<> x7 (\S+0,04^ +0,028;) \fAIGDT|b0|i0;\H1.7500;È c 0,005 \A1;\fArial|b0|i0;\H1.7500;2x Ø19,2{\H1.25;\S+0^ -0,05;} CT \A1;\fArial|b0|i0;\H1.7500;Ø15,15{\H1.25;\S+0,05^ -0;} \A1;{\fAIGDT|b0|i0;\H1.7500;\ln}\fArial|b0|i0;\H1.7500;11 \fArial|b0|i0;\H1.7500;Ø<> x7 (\S+0,04^ +0,028;) \fAIGDT|b0|i0;\H1.7500;È"
    18. 

  18. 16,16,B B
    19. 

  19. 17,17,"Rz 0,25 \fArial|b0|i0;\H1.7500;2x Ø<> CT \fArial|b0|i0;\H1.7500;Ø<> Rz 0,25 \fArial|b0|i0;\H1.7500;2x Ø<> CT \fArial|b0|i0;\H1.7500;Ø<>"
    20. 

  20. 18,18,"2x r Ø0,05 CZ 2x r Ø0,05 CZ"
    21. 

  21. 19,19,B B
    22. 

  22. 20,20,Z Z
    23. 

  23. 21,21,A A
    24. 

  24. 22,22,B B
    25. 

  25. 23,23,C C
    26. 

  26. 24,24,D \A1;R2 Z ( 20 : 1 ) D \A1;R2 Z ( 20 : 1 )
    27. 

  27. 25,25,2 2
    28. 

  28. 26,26,3 - 2 : 1 HUM 11.07.2018 B1 - 2 : 1 HUM 11.07.2018 B1 3 - 2 : 1 HUM 11.07.2018 B1 - 2 : 1 HUM 11.07.2018 B1
    29. 

  29. 27,27,4 A3 5129275 Valve Lifter GV12.2 1 1 Component Drawing A3 5129275 Valve Lifter GV12.2 1 1 Component Drawing 4 A3 5129275 Valve Lifter GV12.2 1 1 Component Drawing A3 5129275 Valve Lifter GV12.2 1 1 Component Drawing
    30. 

  30. 28,28,5 5
    31. 

  31. 29,29,6 6
    32. 

  32. 30,30,7 7
    33. 

  33. 31,31,1 1
    34. 

  34. 32,32,5 5
    35. 

  35. 33,33,6 6
    36. 

  36. 34,34,7 7
    37. 

  37. 35,35,8 8
    38. 

  38. 36,36,2 2
    39. 

  39. 37,37,3 3
    40. 

  40. 38,38,4 4
    41. 

  41. 39,39,A A
    42. 

  42. 40,40,B B
    43. 

  43. 41,41,C C
    44. 

  44. 42,42,D D
    45. 

  45. 43,43,E E
    46. 

  46. 44,44,F F
    47. 

  47. 45,45,A3 A3 A3 A3
    48. 

  48. 46,46,"b 0,01 A r Ø0,05 B b 0,01 A r Ø0,05 B"
    49. 

  49. 47,47,X X
    50. 

  50. 48,48,Y \fArial|b0|i0;\H2.5000;Document type: Y \fArial|b0|i0;\H2.5000;Document type:
    51. 

  51. 49,49,"\A1;0,7 \A1;45\U+00B0 <> <> \A1;0,7 \A1;45\U+00B0 <> <>"
    52. 

  52. 50,50,\fArial|b0|i0;\H2.2000;Part Number: \fArial|b0|i0;\H2.2000;Part Number:
    53. 

  53. 51,51,\fArial|b0|i0;\H2.2000;Page: \fArial|b0|i0;\H3.0000;/ 1 1 1 1 \fArial|b0|i0;\H2.2000;Page: \fArial|b0|i0;\H3.0000;/ 1 1 1 1
    54. 

  54. 52,52,"\fArial|b0|i0;\H1.5217;Drawing Approval Stamp \A1;R0,8 \A1;\fArial|b0|i0;\H1.7500;Ø4,1 <> \fArial|b0|i0;\H1.7500;Ø<> \fArial|b0|i0;\H1.5217;Drawing Approval Stamp \A1;R0,8 \A1;\fArial|b0|i0;\H1.7500;Ø4,1 <> \fArial|b0|i0;\H1.7500;Ø<>"
    55. 

  55. 53,53,"\fArial|b0|i0;\H2.2000;ENGINE Division X ( 10 : 1 ) -0,1 -0,05 -0,1 -0,1 -0,05 -0,1 \fArial|b0|i0;\H2.2000;ENGINE Division X ( 10 : 1 ) -0,1 -0,05 -0,1 -0,1 -0,05 -0,1"
    56. 

  56. 54,54,\fArial|b0|i0;\H2.5000;Description: \fArial|b0|i0;\H2.5000;Description:
    57. 

  57. 55,55,5129275 5129275 5129275 5129275
    58. 

  58. 56,56,Valve Lifter GV12.2 Component Drawing Valve Lifter GV12.2 Component Drawing Valve Lifter GV12.2 Component Drawing Valve Lifter GV12.2 Component Drawing
    59. 

  59. 57,57,1 Start drawing REV. 1 Start drawing REV.
    60. 

  60. 58,58,- 04.04.2018 LKA 10.07.2018 SECTION DATE DRAWN BY INSP. DATE - 04.04.2018 LKA 10.07.2018 SECTION DATE DRAWN BY INSP. DATE
    61. 

  61. 59,59,KB INSP. BY KB INSP. BY
    62. 

  62. 60,60,REVISION HISTORY REVISION HISTORY
    63. 

  63. 61,61,DESCRIPTION DESCRIPTION
    64. 

  64. 62,62,\A1;5\U+00B0 <> \A1;5\U+00B0 <>
    65. 

  65. 63,63,"\A1;1,65 <> <> \A1;1,65 <> <>"
    66. 

  66. 64,64,"Ra 0,8 Ra 0,8"
    67. 

  67. 65,65,"b 0,01 A b 0,01 A"
    68. 

  68. 66,66,"g 0,01 g 0,01"
    69. 

  69. 67,67,{\fArial|b0|i0;E} Y ( 10 : 1 ) {\fArial|b0|i0;E} Y ( 10 : 1 )
    70. 

  70. 68,68,{\fArial|b0|i0;F} {\fArial|b0|i0;F}
    71. 

  71. 69,69,{\fAIGDT|b0|i0;\H1.7500;\ln}\fArial|b0|i0;\H1.7500;<> {\fAIGDT|b0|i0;\H1.7500;\ln}\fArial|b0|i0;\H1.7500;<>
    72. 

  72.