/* powerlnk.h (C) B&R Industrie Elektronik */ #ifndef POWERLNK_H_ #define POWERLNK_H_ 0x1109 /* Version V1.10.9 */ #ifdef __cplusplus extern "C" { #endif #include #ifndef _BUR_PUBLIC #define _BUR_PUBLIC #endif /* Constants */ #ifdef _REPLACE_CONST /* Error Numbers */ #define ERR_PLMGR_VERS_CONFLICT 20900 /* Version conflict in system structures */ #define ERR_PLMGR_NOMEM 20901 /* Failed to allocate memory */ #define ERR_PLMGR_WRONG_DEVICE 20903 /* wrong device description */ #define ERR_PLMGR_CONFIG_NOT_FOUND 20904 /* configuration not found */ #define ERR_PLMGR_ALREADY_CONFIGURATED 20905 /* configuration already done */ #define ERR_PLMGR_NOT_IMPLEMENTED 20906 /* function is not implemented */ #define ERR_PLMGR_ILLEGAL_PARAMETER 20908 /* Illegal parameters in function call */ #define ERR_PLMGR_WRONG_IDENT 20911 /* Wrong ident */ #define ERR_PLMGR_ERROR_ALLOC_STATION 20913 /* Error at allocating station */ #define ERR_PLMGR_ERROR_ALLOC_CHANNEL 20914 /* Error at allocating channel */ #define ERR_PLMGR_ERROR_ALLOC_BUFFER 20915 /* Error at allocating buffer */ #define ERR_PLMGR_CHANNEL_ALREADY_OPEN 20916 /* Channel was opened by someone else */ #define ERR_PLMGR_NO_FRAME_RECEIVED 20917 /* No frame received by now */ #define ERR_PLMGR_FRAME_TOO_LONG 20918 /* Received frame does not fit into buffer */ #define ERR_PLMGR_WRITE_ACTIVE 20919 /* Write is already active for this channel */ #define ERR_PLMGR_OFFSET_TO_HIGH 20920 /* Offset for ident is too high */ #define ERR_PLMGR_NIL_POINTER 20921 /* parameter pointed to address 0 */ #define ERR_PLMGR_OVERFLOW 20922 /* overflow of buffer */ #define ERR_PLMGR_UNAVAILABLE_DATAPOINT 20923 /* datapoint not available */ #define ERR_PLMGR_WRONG_TASKCLASS 20924 /* taskklass does not exist */ #define ERR_PLMGR_STATION_NOT_ACTIVE 20925 /* station not active */ #define ERR_PLMGR_TOO_MANY_INTERFACES 20926 /* To many PowerLink-Interfaces configured */ #define ERR_PLMGR_BUS_CONFIGURED_TWICE 20927 /* Same bus number declared twice */ #define ERR_PLMGR_SYNC_BY_SYSTEM 20928 /* Syncronisation has to be configured by System */ #define ERR_PLMGR_SYNC_FAILED 20929 /* Synchronizing System failed */ #define ERR_PLMGR_CONFIG_CONFLICT 20930 /* Conflict with IOTIMER-Device-Configuration */ #define ERR_PLMGR_NOT_IN_PRES 20931 /* data point not in poll response of station */ #define ERR_PLMGR_UNKNOWN_TYPE 20932 /* datatype of data point not valid */ #define ERR_PLMGR_NO_PDO_MAPPING_DEFINED 20933 /* no PDO mapping defined */ #define ERR_PLMGR_ALREADY_INITIALIZED 20937 /* station already initialized */ #define ERR_PLMGR_INIT_NOT_FINISHED 20938 /* initialization of delayed station not finished yet*/ #define ERR_PLMGR_PARSE_ERROR 20950 /* Error at parsing datapoint description */ #define ERR_PLMGR_PARSE_END_EXPECTED 20951 /* expected end of string earlier */ #define ERR_PLMGR_PARSE_NO_PERCENT 20952 /* no percent % singn at start of datapoint description */ #define ERR_PLMGR_PARSE_NOT_IN_OR_OUT 20953 /* Direction neither I nor Q */ #define ERR_PLMGR_PARSE_INTERFACE 20954 /* incorrect interface number */ #define ERR_PLMGR_PARSE_STATION 20955 /* incorrect station number */ #define ERR_PLMGR_PARSE_MODUL 20956 /* incorrect modul number */ #define ERR_PLMGR_PARSE_SUBMODUL 20957 /* incorrect sub modul number */ #define ERR_PLMGR_PARSE_CHANNEL 20958 /* incorrect channel number */ #define ERR_PLMGR_PARSE_BIT 20959 /* incorrect bit number */ #define ERR_PLMGR_PARSE_TO_MANY_NUMBERS 20960 /* too many numbers in datapoint description */ #define ERR_PLMGR_PARSE_NETTIME 20961 /* wrong datatype or length for nettime */ #define ERR_PLMGR_PARSE_SLOT 20962 /* incorrect slot number SL */ #define ERR_PLMGR_PARSE_SUBSLOT 20963 /* incorrect subslot number SS */ #define ERR_PLMGR_PARSE_TRAILINGCHARS 20964 /* trailing characters after valid channel or device name*/ #define ERR_PLMGR_PARSE_ARRAYSIZE 20965 /* arraysize not valid */ #define ERR_PLMGR_WARNING_FW_UPDATE 20980 /* Updated firmware for station, (in error log book) */ #define ERR_PLMGR_HW_BOOTUP_FAILED 20981 /* Error at starting PowerLink hardware (in error log book) */ #define ERR_PLMGR_RECOMMEND_FW_UPDATE 20982 /* Firmware update for IF686 is recommended, download plfif686.br */ #define ERR_PLMGR_INTERNAL 20997 /* Internal error in Library, this should never happen (in error log book) */ #define ERR_PLMGR_EXCEPTION 20998 /* unexpected exception from PowerLink hardware (in error log book) */ #define ERR_PLMGR_NO_POWERLNK_LIBRARY 20999 /* PowerLink-Library not on plc */ /* Taskclasses for plCECreate function */ #define plCE_CYCLIC_1 1 #define plCE_CYCLIC_2 2 #define plCE_CYCLIC_3 3 #define plCE_CYCLIC_4 4 /* plCE_CYCLIC_5 .. 8 only valid for i386-Targets */ #define plCE_CYCLIC_5 5 #define plCE_CYCLIC_6 6 #define plCE_CYCLIC_7 7 #define plCE_CYCLIC_8 8 /* plCE_TIMER_x only valid for m68k-Targets */ #define plCE_TIMER_1 -1 #define plCE_TIMER_2 -2 /* Flags for plAcycOpen function */ #define plOPEN_MODE_READ 0 /* open channel for read*/ #define plOPEN_MODE_WRITE 1 /* open channel for write */ #define plOPEN_MODE_RW 2 /* open channel for read and write */ #define plOPEN_MODE_EPLV1 0x10 /* Force to V1 format */ #define plOPEN_MODE_EPLV2 0x20 /* Force to V2 format */ #define plOPEN_MODE_LENGTH 0x40 /* Use length in frame even in V2 */ #define plOPEN_PRIORITY_ENABLE 0x8000 /* enable using priority (used in V2 only) */ /* priority for asynchrounous send, applied in EPL V2 only */ #define plOPEN_PRIORITY_LOWEST 0x0000 /* lowest priority */ #define plOPEN_PRIORITY_LOWER 0x0100 #define plOPEN_PRIORITY_LOW 0x0200 #define plOPEN_PRIORITY_GENERIC 0x0300 /* normal priority (default) */ #define plOPEN_PRIORITY_HIGH 0x0400 #define plOPEN_PRIORITY_HIGHER 0x0500 #define plOPEN_PRIORITY_HIGHEST 0x0600 /* highest priority */ #define plOPEN_PRIORITY_NMT 0x0700 /* reserved for NMT requests */ /* States from plState Function */ /* Error States from plState */ #define plSTATE_WRONG_IDENT 0xffff /* States of Stations */ #define plSTATE_STATION_NONEXISTANT 0x0000 /* No Access to this station has occured yet */ #define plSTATE_STATION_WAITING 0x0001 /* The software tried to access this station, but it is not on the BUS */ #define plSTATE_STATION_OSDL 0x0002 /* The firmware had the wrong version so a Firmwareupdate is in progress */ #define plSTATE_STATION_CONFIG 0x0003 /* The configuration of the Station is in progress */ #define plSTATE_STATION_ACTIVATEING 0x0004 /* The activation of the copy entries is in progress */ #define plSTATE_STATION_ACTIVE 0x0005 /* The station is online and the copy entries are handle cyclically */ #define plSTATE_STATION_INACTIVE 0x0006 /* The station is offline but was active before */ #define plSTATE_STATION_CHANGED 0x0007 /* The IO configuration of the station has changed, a reboot is necessary to allow the changed station to get active. */ #define plSTATE_STATION_CFGFAILED 0x0008 /* The configuration of the station failed, and the option EPL_NoResetOnConfigFail is on. */ #define plSTATE_STATION_FAILED 0x000f /* Configuration of Station failed (out of memory or other serious problem) */ /* States of Copy Entries */ #define plSTATE_CE_WAITING 1 /* Station for Copy-Entry was not active since Copy-Entry was created */ #define plSTATE_CE_ACTIVE 2 /* Station is online and Copy-Entry is active */ #define plSTATE_CE_INACTIVE 3 /* Copy-Entry is active, but Station is not online */ #define plSTATE_CE_ERROR 4 /* Copy-Entry is not available on its Station */ /* States of Write Channels */ #define plSTATE_CHANNEL_WRITE_MASK 0x0f00 /* Mask state of Read/Write-Channels with this mask to get the Write-State */ #define plSTATE_CHANNEL_WRITE_CLOSED 0x0000 /* This Channel is not opend for Write access */ #define plSTATE_CHANNEL_WRITE_OPEN 0x0100 /* Channel is open, no Frames are waiting to be sent */ #define plSTATE_CHANNEL_WRITE_ACTIVE 0x0200 /* Write-Buffer is waiting to be sent */ #define plSTATE_CHANNEL_WRITE_WRONG 0x0f00 /* Result of plSTATE_WRONG_IDENT & plSTATE_CHANNEL_WRITE_MASK */ /* States of Read Channels */ #define plSTATE_CHANNEL_READ_MASK 0x00f0 /* Mask state of Read/Write-Channels with this mask to get the Read-State */ #define plSTATE_CHANNEL_READ_CLOSED 0x0000 /* This channel is not opend for Read access */ #define plSTATE_CHANNEL_READ_EMPTY 0x0010 /* This channel is open but does not have any frames */ #define plSTATE_CHANNEL_READ_READY 0x0020 /* This channel is open and has a ready frame to be read */ #define plSTATE_CHANNEL_READ_WRONG 0x00f0 /* Result of plSTATE_WRONG_IDEND & plSTATE_CHANNEL_READ_MASK */ /* actionIDs for plAction function */ #define plACTION_GET_NET_QUALITY 1 /* read statistical info of netquality*/ #define plACTION_GET_IDENT 2 /* get ident of a PowerLink station */ #define plACTION_START_SYNC_STATISTICS 3 /* start collection of statistic information of synchronous task class only on SG3 */ #define plACTION_STOP_SYNC_STATISTICS 4 /* stop collection of statistic information of synchronous task class only on SG3*/ #define plACTION_GET_SYNC_STATISTICS 5 /* read statistic information of synchrounous task class to a PLACTION_SYNC_STATISTICS_typ structure only on SG3 */ #define plACTION_GET_FIRMWARE_VERSION 6 /* read version of firmware to UDINT variable */ #define plACTION_DEVICE_TO_BUS_NR 7 /* Convert device string to bus number */ #define plACTION_GET_STATION_NUMBER 8 /* read node number of local station to UDINT variable */ #define plACTION_GET_IF_PARAMETERS 9 /* get the interface parameters for a powerlink bus */ #define plACTION_GET_LOST_INA_SOURCE 10 /* internal only! get last source station of lost ina request to a DINT (-1) if no lost */ #define plACTION_GET_STATIONFLAG 12 /* get station flag e.g. plSYSCONF_STATIONFLAG_SLOW to UDINT variable */ #define plACTION_GET_STATION_HWVARIANT 13 /* get hardware ident of station to UDINT variable */ #define plACTION_GET_STATION_SHIFT 14 /* get cyclic cycle shift of multiplexed station to UDINT variable */ #define plACTION_GET_IF_CYCLE_TIME 15 /* get powerlink cycle time to UDINT variable */ #define plACTION_GET_IF_PRESCALE 16 /* get powerlink prescale to UDINT variable */ #define plACTION_GET_IF_MUXPRESCALE 17 /* get multiplex prescale to UDINT variable */ #define plACTION_GET_IF_RSQUEUELAPCNT 18 /* get rs queue lap count to UDINT variable */ #define plACTION_GET_CROSSLINK_INFO 19 /* get crosslink infomation of input datapoint (only SG4 >= AR V2.85) */ #define plACTION_GET_PROTOCOL_VERSION 20 /* get set protocol version to UDINT variable */ #define plACTION_GET_DP_INFO 21 /* query the PDO information of an I/O data point (only SG4 >= AR B2.96) */ #define plACTION_GET_PDO_INFO 22 /* query the PDO information of by Index/Subindex (only SG4 >= AR B2.96) */ /* action 23, 24 and 25 used by ncman */ /* action 26, 27 cycletime info for NCManager */ #define plACTION_SET_STATION_NUMBER 28 /* set node number of delayed iCN */ /* action 29 used by vision */ #define plDIRECTION_IN 1 /* Direction "input" to PLC returned from plACTION_GET_PDO_INFO */ #define plDIRECTION_OUT 2 /* Direction "output" from PLC returned from plACTION_GET_PDO_INFO */ #define plDIRECTION_XOUT 3 /* Direction "crosslinked output" returned from plACTION_GET_PDO_INFO */ #define plMESSAGE_TYPE_PREQ 3 /* MessageType "poll request" returned from plACTION_GET_PDO_INFO */ #define plMESSAGE_TYPE_PRES 4 /* MessageType "poll response" returned from plACTION_GET_PDO_INFO */ /* Flags for stations in config */ #define plSYSCONF_STATIONFLAG_SLOW 0x20 /* Station is a slow one */ #else #ifndef _GLOBAL_CONST #define _GLOBAL_CONST _WEAK const #endif _GLOBAL_CONST signed char plCE_CYCLIC_8; _GLOBAL_CONST signed char plCE_CYCLIC_7; _GLOBAL_CONST signed char plCE_CYCLIC_6; _GLOBAL_CONST signed char plCE_CYCLIC_5; _GLOBAL_CONST signed char plCE_CYCLIC_4; _GLOBAL_CONST signed char plCE_CYCLIC_3; _GLOBAL_CONST signed char plCE_CYCLIC_2; _GLOBAL_CONST signed char plCE_CYCLIC_1; _GLOBAL_CONST signed char plCE_TIMER_2; _GLOBAL_CONST signed char plCE_TIMER_1; _GLOBAL_CONST unsigned long plOPEN_MODE_LENGTH; _GLOBAL_CONST unsigned long plOPEN_MODE_EPLV2; _GLOBAL_CONST unsigned long plOPEN_MODE_EPLV1; _GLOBAL_CONST unsigned long plOPEN_MODE_RW; _GLOBAL_CONST unsigned long plOPEN_MODE_WRITE; _GLOBAL_CONST unsigned long plOPEN_MODE_READ; _GLOBAL_CONST unsigned char plSYSCONF_STATIONFLAG_SLOW; _GLOBAL_CONST unsigned short plSTATE_WRONG_IDENT; _GLOBAL_CONST unsigned short plSTATE_CE_ERROR; _GLOBAL_CONST unsigned short plSTATE_CE_INACTIVE; _GLOBAL_CONST unsigned short plSTATE_CE_ACTIVE; _GLOBAL_CONST unsigned short plSTATE_CE_WAITING; _GLOBAL_CONST unsigned short plSTATE_STATION_FAILED; _GLOBAL_CONST unsigned short plSTATE_STATION_CFGFAILED; _GLOBAL_CONST unsigned short plSTATE_STATION_CHANGED; _GLOBAL_CONST unsigned short plSTATE_STATION_INACTIVE; _GLOBAL_CONST unsigned short plSTATE_STATION_ACTIVE; _GLOBAL_CONST unsigned short plSTATE_STATION_ACTIVATEING; _GLOBAL_CONST unsigned short plSTATE_STATION_CONFIG; _GLOBAL_CONST unsigned short plSTATE_STATION_OSDL; _GLOBAL_CONST unsigned short plSTATE_STATION_WAITING; _GLOBAL_CONST unsigned short plSTATE_STATION_NONEXISTANT; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_WRITE_WRONG; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_WRITE_OPEN; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_WRITE_ACTIVE; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_WRITE_CLOSED; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_WRITE_MASK; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_READ_WRONG; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_READ_READY; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_READ_EMPTY; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_READ_CLOSED; _GLOBAL_CONST unsigned short plSTATE_CHANNEL_READ_MASK; _GLOBAL_CONST unsigned char plMESSAGE_TYPE_PRES; _GLOBAL_CONST unsigned char plMESSAGE_TYPE_PREQ; _GLOBAL_CONST unsigned char plDIRECTION_XOUT; _GLOBAL_CONST unsigned char plDIRECTION_OUT; _GLOBAL_CONST unsigned char plDIRECTION_IN; _GLOBAL_CONST unsigned long plACTION_GET_PDO_INFO; _GLOBAL_CONST unsigned long plACTION_GET_DP_INFO; _GLOBAL_CONST unsigned long plACTION_GET_CROSSLINK_INFO; _GLOBAL_CONST unsigned long plACTION_GET_IF_RSQUEUELAPCNT; _GLOBAL_CONST unsigned long plACTION_GET_IF_MUXPRESCALE; _GLOBAL_CONST unsigned long plACTION_GET_IF_PRESCALE; _GLOBAL_CONST unsigned long plACTION_GET_IF_CYCLE_TIME; _GLOBAL_CONST unsigned long plACTION_GET_STATION_HWVARIANT; _GLOBAL_CONST unsigned long plACTION_GET_STATIONFLAG; _GLOBAL_CONST unsigned long plACTION_GET_IF_PARAMETERS; _GLOBAL_CONST unsigned long plACTION_GET_STATION_NUMBER; _GLOBAL_CONST unsigned long plACTION_DEVICE_TO_BUS_NR; _GLOBAL_CONST unsigned long plACTION_GET_FIRMWARE_VERSION; _GLOBAL_CONST unsigned long plACTION_GET_SYNC_STATISTICS; _GLOBAL_CONST unsigned long plACTION_STOP_SYNC_STATISTICS; _GLOBAL_CONST unsigned long plACTION_START_SYNC_STATISTICS; _GLOBAL_CONST unsigned long plACTION_GET_IDENT; _GLOBAL_CONST unsigned long plACTION_GET_NET_QUALITY; _GLOBAL_CONST unsigned long plACTION_SET_STATION_NUMBER; _GLOBAL_CONST unsigned short ERR_PLMGR_NO_POWERLNK_LIBRARY; _GLOBAL_CONST unsigned short ERR_PLMGR_EXCEPTION; _GLOBAL_CONST unsigned short ERR_PLMGR_INTERNAL; _GLOBAL_CONST unsigned short ERR_PLMGR_RECOMMEND_FW_UPDATE; _GLOBAL_CONST unsigned short ERR_PLMGR_HW_BOOTUP_FAILED; _GLOBAL_CONST unsigned short ERR_PLMGR_WARNING_FW_UPDATE; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_ARRAYSIZE; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_TRAILINGCHARS; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_SUBSLOT; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_SLOT; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_NETTIME; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_TO_MANY_NUMBERS; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_BIT; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_CHANNEL; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_SUBMODUL; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_MODUL; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_STATION; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_INTERFACE; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_NOT_IN_OR_OUT; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_NO_PERCENT; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_END_EXPECTED; _GLOBAL_CONST unsigned short ERR_PLMGR_PARSE_ERROR; _GLOBAL_CONST unsigned short ERR_PLMGR_INIT_NOT_FINISHED; _GLOBAL_CONST unsigned short ERR_PLMGR_ALREADY_INITIALIZED; _GLOBAL_CONST unsigned short ERR_PLMGR_NO_PDO_MAPPING_DEFINED; _GLOBAL_CONST unsigned short ERR_PLMGR_UNKNOWN_TYPE; _GLOBAL_CONST unsigned short ERR_PLMGR_NOT_IN_PRES; _GLOBAL_CONST unsigned short ERR_PLMGR_CONFIG_CONFLICT; _GLOBAL_CONST unsigned short ERR_PLMGR_SYNC_FAILED; _GLOBAL_CONST unsigned short ERR_PLMGR_SYNC_BY_SYSTEM; _GLOBAL_CONST unsigned short ERR_PLMGR_BUS_CONFIGURED_TWICE; _GLOBAL_CONST unsigned short ERR_PLMGR_TOO_MANY_INTERFACES; _GLOBAL_CONST unsigned short ERR_PLMGR_STATION_NOT_ACTIVE; _GLOBAL_CONST unsigned short ERR_PLMGR_WRONG_TASKCLASS; _GLOBAL_CONST unsigned short ERR_PLMGR_UNAVAILABLE_DATAPOINT; _GLOBAL_CONST unsigned short ERR_PLMGR_OVERFLOW; _GLOBAL_CONST unsigned short ERR_PLMGR_NIL_POINTER; _GLOBAL_CONST unsigned short ERR_PLMGR_OFFSET_TO_HIGH; _GLOBAL_CONST unsigned short ERR_PLMGR_WRITE_ACTIVE; _GLOBAL_CONST unsigned short ERR_PLMGR_FRAME_TOO_LONG; _GLOBAL_CONST unsigned short ERR_PLMGR_NO_FRAME_RECEIVED; _GLOBAL_CONST unsigned short ERR_PLMGR_CHANNEL_ALREADY_OPEN; _GLOBAL_CONST unsigned short ERR_PLMGR_ERROR_ALLOC_BUFFER; _GLOBAL_CONST unsigned short ERR_PLMGR_ERROR_ALLOC_CHANNEL; _GLOBAL_CONST unsigned short ERR_PLMGR_ERROR_ALLOC_STATION; _GLOBAL_CONST unsigned short ERR_PLMGR_WRONG_IDENT; _GLOBAL_CONST unsigned short ERR_PLMGR_ILLEGAL_PARAMETER; _GLOBAL_CONST unsigned short ERR_PLMGR_NOT_IMPLEMENTED; _GLOBAL_CONST unsigned short ERR_PLMGR_ALREADY_CONFIGURATED; _GLOBAL_CONST unsigned short ERR_PLMGR_CONFIG_NOT_FOUND; _GLOBAL_CONST unsigned short ERR_PLMGR_WRONG_DEVICE; _GLOBAL_CONST unsigned short ERR_PLMGR_NOMEM; _GLOBAL_CONST unsigned short ERR_PLMGR_VERS_CONFLICT; #endif /* Datatypes and datatypes of function blocks */ /* Konfiguration for remote stations */ typedef struct PLSYSCONF_RS_typ { USINT size_x16; /* Size of configuration entry in blocks of 16 bytes (by now always 1) */ /* Set size_x16 to 0 to mark the last remote station configuration entry */ USINT bus; /* Bus number: Valid Numbers 1 .. 255 */ USINT station; /* Station number */ USINT flags; /* flags as OR of constants plSYSCONF_STATIONFLAG_... */ UDINT hwVariant; /* Hardware variant: 0=any */ INT insize; /* Size for input buffer (0xffff for automatic)*/ INT outsize; /* Size for output buffer (0xffff for automatic)*/ INT RespTimeout; /* response timeout in µs <= 0 -> default = 25µs */ USINT MuxNetworkSlot; /* ignored for normal stations, for multiplexed stations 1 to MuxPrescaler */ USINT reserve2; /* reserved set to 0 */ }PLSYSCONF_RS_typ; /* Konfiguration of interfaces */ typedef struct PLSYSCONF_IF_typ/* Configuration structure for PowerLink Interface Modules */ { USINT station; /* Station number 0 for Master, 1..253 for intelligent slave */ USINT slot; /* slot of the POWERLINK interface card */ USINT subslot; /* subslot of the POWERLINK interface card */ USINT interface; /* interface number */ UDINT pl_cycle; /* cycle time of PowerLink cycle in us */ UDINT pl_prescale; /* prescaler for synchron PowerLink timer-taskclass */ UDINT uptimeout; /* timeout for configurated remote stations at power up in us */ USINT bus; /* Bus number of PowerLink interface. Corresponds to "bus" element in the PLSYSCONF_RS_typ. Valid Number 1...255. If bus is set to 0, the Library countes the busses by itself. */ USINT MuxStationsPerCycle; /* ignored since FW-Version V0.06.0: until FW-Version V0.05.9 number of handled multiplexed stations in each powerlink cycle */ USINT MuxPrescaler; /* number of powerlink cycles for one mux cycle 1 .. 253 */ SINT ATOCtaskclass;/* taskclass triggering the Output-DMA, 0 ..triggered by System-Tick, plCE_CYCLIC_1 to plCE_CYCLIC_8 ..triggered by cyclic taskklass */ UDINT reservedlong; /* reserved set to 0 */ }PLSYSCONF_IF_typ; typedef struct PLSYSCONF_typ /* global PowerLink configuration */ { USINT noIF; /* number of interface cards (allways 1 on SG3) */ USINT takt_master; /* Which interface is taktmaster on SG3 (allways 1), 0 for no taktmaster */ UINT reserve1; /* reserved set to 0 */ UDINT pRemoteCfg; /* Pointer to array of remote station configuration */ /* end array with an entry with .size_x16=0 */ PLSYSCONF_IF_typ interfaces[15]; /* Interface configurations */ }PLSYSCONF_typ; /* Object structures for plAction function */ typedef struct PLACTION_NET_QUALITY_typ{ UDINT nLineQualFreezeCnt; /* out: count of started io cycles within last time */ UDINT nLineQualFailCnt; /* out: count of failed cycles within last time */ }PLACTION_NET_QUALITY_typ; typedef struct PLACTION_GET_IDENT_typ{ char *pName; /* in: name */ UDINT ident; /* out: ident */ }PLACTION_GET_IDENT_typ; typedef struct PLACTION_DEVICE_TO_BUS_NR_typ{ char *pDeviceString; /* in: device string */ USINT busNumber; /* out: bus number */ }PLACTION_DEVICE_TO_BUS_NR_typ; /* PLACTION_SYNC_STATISTICS_typ Supported only on SG3 */ typedef struct PLACTION_SYNC_STATISTICS_typ{ UINT act_usec; /* out: duration of last synchrounous taskclass */ UINT min_usec; /* out: minimal duration of synchrounous taskclass */ UINT max_usec; /* out: maximal duration of synchrounous taskclass */ UINT act_cycle; /* out: exact cycletime of last synchronous taskclass */ UINT min_cycle; /* out: minimal cycletime of synchronous taskclass */ UINT max_cycle; /* out: maximal cycletime of synchronous taskclass */ }PLACTION_SYNC_STATISTICS_typ; typedef struct PLACTION_GET_CROSSLINK_INFO_typ{ const char *DeviceName; /* in: name of io device e.g. "SS1.IF2.ST3.SL7" */ const char *ChannelName; /* in: name of datapoint e.g. "AnalogInput01" */ UINT NodeId; /* out: Node number of powerlink station */ UINT Offset; /* out: Offset in data counted in Bits */ UINT Length; /* out: Length of data point counted in Bits */ UINT TypeId; /* out: Type ident of datapoint EPL V2 (matches CANopen Specification) */ }PLACTION_GET_CROSSLINK_INFO_typ; typedef struct PLACTION_GET_DP_INFO_typ{ const char *DeviceName; /* in: name of io device e.g. "SS1.IF2.ST3.SL7" */ const char *ChannelName; /* in: name of datapoint e.g. "AnalogInput01" */ USINT DestNode; /* out: Node number of destination in network frame */ USINT SrcNode; /* out: Node number of source in network frame */ USINT MessageType; /* out: Message Type on Powerlink (plMESSAGE_TYPE_PREQ(=3) PReq, plMESSAGE_TYPE_PRES(=4) PRes) */ USINT MuxSlot; /* out: multiplex slot (0 continous station) */ UINT OffsetAbs; /* out: Offset in net data of EPL frame counted in bits */ UINT OffsetRel; /* out: Offset relative to station net data in bits */ UINT Length; /* out: Length of data point counted in bits */ UINT TypeId; /* out: Type ident of datapoint EPL V2 (matches CANopen Specification) */ UINT NodeInSize; /* out: input net size of station (PRes) */ UINT NodeOutSize; /* out: output net size of station (size of PReq, or part of PResMN ) */ USINT Direction; /* out: plDIRECTION_IN(=1) Input,plDIRECTION_OUT(=2) Output relative to local node */ USINT Node; /* out: node of datapoint */ UINT reserved; /* res: reserved word for alignment */ UDINT ImageIndex; /* out: image index for inputs 0 for outputs */ UDINT ImageOffset; /* out: offset of datapoint in local image buffer (bytes) */ }PLACTION_GET_DP_INFO_typ; typedef struct PLACTION_GET_PDO_INFO_typ{ const char *DeviceName; /* in: name of io device e.g. "SS1.IF2.ST3.SL7" */ UINT ODIndex; /* in: Index of object in Powerlink object dictionary */ USINT ODSubindex; /* in: query the PDO information of by Index/Subindex */ USINT align; /* res: reseved for alignment */ USINT DestNode; /* out: Node number of destination in network frame */ USINT SrcNode; /* out: Node number of source in network frame */ USINT MessageType; /* out: Message Type on Powerlink (plMESSAGE_TYPE_PREQ(=3) PReq, plMESSAGE_TYPE_PRES(=4) PRes) */ USINT MuxSlot; /* out: multiplex slot (0 continous station) */ UINT OffsetAbs; /* out: Offset in net data of EPL frame counted in bits */ UINT OffsetRel; /* out: Offset relative to station net data in bits */ UINT Length; /* out: Length of data point counted in bits */ UINT TypeId; /* out: Type ident of datapoint EPL V2 (matches CANopen Specification) */ UINT NodeInSize; /* out: input net size of station (PRes) */ UINT NodeOutSize; /* out: output net size of station (size of PReq, or part of PResMN ) */ USINT Direction; /* out: plDIRECTION_IN(=1) Input,plDIRECTION_OUT(=2) Output relative to local node */ USINT Node; /* out: node of datapoint */ UINT reserved; /* res: reserved word for alignment */ UDINT ImageIndex; /* out: image index for inputs 0 for outputs */ UDINT ImageOffset; /* out: offset of datapoint in local image buffer (bytes) */ }PLACTION_GET_PDO_INFO_typ; /* Prototyping of functions and function blocks */ _BUR_PUBLIC UINT plConfig(PLSYSCONF_typ *pConfigStruct); _BUR_PUBLIC UINT plCECreate(const char* pDatapoint, void* address, SINT taskclass, UDINT *pIdent); _BUR_PUBLIC UINT plCEDelete(UDINT ident); _BUR_PUBLIC UINT plState(UDINT ident); _BUR_PUBLIC UINT plAction(UDINT ident, UDINT actionID, void* pObject, UDINT objectSize); _BUR_PUBLIC UINT plAcycOpen(const char* pName, UDINT flags, UDINT *pIdent); _BUR_PUBLIC UINT plAcycClose(UDINT ident); _BUR_PUBLIC UINT plAcycRead(UDINT ident, void* bufferAdr, UDINT bufferLen, UDINT *pReadLen); _BUR_PUBLIC UINT plAcycInvite(UDINT ident); _BUR_PUBLIC UINT plAcycWrite(UDINT ident, void* bufferAdr, UDINT bufferLen, UDINT *pWrittenLen); #ifdef __cplusplus }; #endif #endif /* POWERLNK_H_ */